Most requested
Illustrations, not photos of the printed piece.
Printed in Québec · you approve your design before anything is printed · checked by our team
- Tell us what you’d like
- Approve your design
- Printed in our Laval farm
Designed for the printer, not just the screen
A 3D model that looks right on screen still has to print well. Our in-house design studio prepares every piece for real 3D printing:
- Real sizes: you choose the height in centimetres.
- Figures get a base that stands; keychains and magnets get their loop or magnet pocket.
- Thin parts are checked so they print cleanly and hold.
- Colours come from the filament, up to 16, never from paint.
- Each model is repaired and prepared as a print-ready file before it reaches our printers.
See a design in our 3D viewer
The Karate Duck, a 3DCentral original design, shown in the same viewer that opens a custom design’s 3D preview.
We kept the choices you made earlier on this device, for 24 hours. Your photos and contact details are never kept.
Step 1 of 5
What would you like us to make?
Choose a piece. Next you’ll pick its size and colours, then add your photos.
Illustrations, not photos of the printed piece.
Questions before you start?
Quick answers
Tap a question. Each answer is written by our team.
Bright, sharp photos where the subject fills most of the picture: one from the front, and one from the side if you have it. When you add a photo, we check its size, sharpness and light here in your browser and give you a tip if it could be better. A tip never stops your request.
Bigger pieces are possible, within what our printers make well:
- with up to 4 colours, up to about 32 cm tall;
- with up to 8 colours, up to about 25 cm tall;
Sizes bigger than the ones above are priced by our team, by hand.
Added to your request as “Needed by”.
No. We print in multicolour plastic (FDM with an automatic multi-material system). Nothing is hand painted and nothing is resin.
Yes, as a personal one-off piece made for you. We don’t sell it or show it publicly.
That’s fine. On the photo step we ask who is in the photos. For a child under 14, a parent or legal guardian gives consent; for someone aged 14 to 17, that person or their parent or guardian does. We keep these photos for a shorter time and never use them in our marketing.
Yes. Choose “Bobblehead” among the figures: a 12 cm figure whose head bobs on a 3D-printed PETG spring, designed by our team with you. One person per bobblehead; for a couple or a group, our team quotes the project.
Step 2 of 5
Size and colours
Pick a size and a colour plan. The price updates as you choose.
What you’ll receive
- Printed in Laval, Quebec, on our FDM printers, in 4 to 16 filament colours. The colour is the filament itself: nothing is painted.
- Up close, fine layer lines and small marks are part of the charm of FDM printing. We make every piece as well as it can be made.
- Plant-based PLA, made to order, so there is very little waste. The scraps left over from printing are recycled into our own filament.
- A display collectible for ages 14 and up, not a toy.
Planned for 2027: a premium resin + UV line, with barely visible layer lines and up to 1 million colours. Stay tuned.
Step 3 of 5
Your photos and idea
Clear photos and a short description help us get the likeness right.
Your photos
Photos that work best
- A clear front view and a three-quarter view
- Good, even light — daylight is ideal
- The whole subject in frame, outfit included
Please avoid
- Filters, sunglasses and hats that hide the face
- Blurry, very dark or tiny photos
or drop them here
Up to 4 photos · JPEG, PNG, WebP or HEIC · up to 15 MB each
A clear photo helps us capture the likeness. You can still continue without one and describe it in words.
Describe the pose, outfit, expression and colours. Mention anything we must keep — and anything to leave out.
Optional. If it’s for a date, tell us: we’ll say with your concept and price whether we can make it.
Not ready to finish now? Get a link by email
We save your choices and your description, and email you one link to finish later, on any device. Photos you added are kept for 24 hours.
Step 4 of 5
How our team designs it
A designer on our team creates your piece with you, step by step. You approve your design before anything is printed.
Printed in our own Laval farm · prices in CAD · no customs or duties at your door in Canada
Printing: we aim for 2–5 business days after you order the print (orders under 10 units), then shipping. Your final print price is confirmed with your design, before you pay for the print.
Check your request
- Photos
- In the photos
- Description
- Needed by
What you’ll approve — and what happens after
What the 3D preview shows
What our team does next
What you’ll receive
- Printed in Laval, Quebec, on our FDM printers, in 4 to 16 filament colours. The colour is the filament itself: nothing is painted.
- Up close, fine layer lines and small marks are part of the charm of FDM printing. We make every piece as well as it can be made.
- Plant-based PLA, made to order, so there is very little waste. The scraps left over from printing are recycled into our own filament.
- A display collectible for ages 14 and up, not a toy.
Planned for 2027: a premium resin + UV line, with barely visible layer lines and up to 1 million colours. Stay tuned.
Order it now at this price
- Pay now through our secure checkout, where you enter your own delivery address.
- A designer on our team then prepares your 3D model.
- You approve your 3D model before anything is printed, and you can ask for changes first.
This price is for one subject. Several people or pets together, such as a person with their pet, are quoted by our team.
Free shipping in Canada. Outside Canada, our team quotes shipping for pieces above 15 cm.
Prefer to see a concept before you pay? Send your request to our team instead: there is nothing to pay today.
What happens next
- A designer on our team reviews your photos and idea.
- You get a concept and your print price by email.
- You approve it — or ask for changes — before you pay for anything.
- Then you order your print. Printing: we aim for 2–5 business days (orders under 10 units), then shipping.
- Right after payment, our AI design agents draw a colour concept for you to approve.
- Then they build your 3D model, and a person on our team checks it before you see it.
- You turn your 3D preview, then approve it or ask for a change — we aim for a first preview within 1–2 business days of payment, not counting the time you take to approve.
- You order your print with your $7.95 CAD fee credited. Printing: we aim for 2–5 business days (orders under 10 units), then shipping.
What your $7.95 CAD AI design fee covers
AI design fee: $7.95 CAD + applicable taxes
- What you get: one AI-assisted custom design from your photos and description. You receive a concept image to approve, then an on-screen 3D preview that a member of our team checks before you see it. No downloadable 3D file is provided.
- When: we aim to deliver your concept and preview within 1–2 business days of payment, and no later than 5 business days. If we miss that limit, we refund you automatically.
- If something goes wrong on our side: if our system or a supplier fails and we can’t deliver a usable preview, we refund the full amount paid, taxes included.
- Changes included: 1 on your concept and 1 on your 3D preview (two separate allowances). You can also switch to a Human-Assisted design at any time.
- Credit toward your print: order the print within 30 days of receiving your preview, and the full $7.95 CAD, plus the taxes you paid on it, is credited to that order as a payment.
- Not refundable once delivered: once a usable preview has been delivered, the fee pays for the design work done and is not refundable. After 30 days the credit ends.
- Previews are approximate. Colours, fine details and proportions on screen can differ from the printed object.
$7.95 CAD + applicable taxes
Taxes are calculated at checkout from your billing address.
Sold by 3DCentral Solutions Inc., 1325 Rue Bergar, Laval, QC H7L 4Z7, Canada, 438-876-7716, info@3dcentral.ca.
Where should we reach you?
We’ll email you at each step.
Your permissions
Each box is separate. Optional boxes don’t change your request.
Request sent
- No need to send it again: we have your request.
- We reply by email. If you don’t see our reply, please check your spam folder.
What happens next
- A designer on our team reviews your photos and idea.
- You get a concept and your print price by email.
- You approve it — or ask for changes — before you pay for anything.
- Then you order your print. Printing: we aim for 2–5 business days (orders under 10 units), then shipping.
